Ansoknives
04-04-04, 07:18 PM
ok lets see....I got these ready to ship....
first is a Jyen in 1/4" RWl-34 powdersteel at 60Rc and cryo treated. The tang is tapered down to a very thin end...only about 1/32 or so..looks really good...! Handle is carbon fiber handrubbed to a smooth finish. The sheath is a multiposition kydexsheath with a beltloop. If you want I can supply different clips for the sheath. Blade is 4.5" and overall is 9".
Price: 385 Euros
http://www.ansoknives.com/avail/1.jpg
http://www.ansoknives.com/avail/2.jpg
http://www.ansoknives.com/avail/3.jpg
http://www.ansoknives.com/avail/4.jpg
Next is a Claw with Thuya handle. Made from RWL-34, 60Rc and cryotreated. Comes with halftanned leather sheath. Price: 215 Euros
http://www.ansoknives.com/avail/11.jpg
http://www.ansoknives.com/avail/12.jpg
http://www.ansoknives.com/avail/13.jpg
This is my version of a fixed blade Chineese folder...i just call it Chineese. The blade is 3.5" RWL-34 powdersteel at 60Rc and cryotreated. Overall lenght is 7.4". The knife comes with a kydexsheath set up so it can ride horizontal, vertical and at 45 degrees. The handlematerial is blue denim Fibermascus fitted with mosaic pins. The tang is tapered and the handle is very slim. Feels very good in the hand. Price 305 Euros
http://www.ansoknives.com/chineseonsheath.jpg
http://www.ansoknives.com/chinesemosaic.jpg
http://www.ansoknives.com/chinesetang.jpg
Payment accepted via personal or cassiers check, Western Union transfer and Paypal (for 3% extra to cover the fee.) Shipping is 15 Euros for one knife and 20 Euros for 2 or more. Take a look at my site for more pictures.
Thanks for looking.
first is a Jyen in 1/4" RWl-34 powdersteel at 60Rc and cryo treated. The tang is tapered down to a very thin end...only about 1/32 or so..looks really good...! Handle is carbon fiber handrubbed to a smooth finish. The sheath is a multiposition kydexsheath with a beltloop. If you want I can supply different clips for the sheath. Blade is 4.5" and overall is 9".
Price: 385 Euros
http://www.ansoknives.com/avail/1.jpg
http://www.ansoknives.com/avail/2.jpg
http://www.ansoknives.com/avail/3.jpg
http://www.ansoknives.com/avail/4.jpg
Next is a Claw with Thuya handle. Made from RWL-34, 60Rc and cryotreated. Comes with halftanned leather sheath. Price: 215 Euros
http://www.ansoknives.com/avail/11.jpg
http://www.ansoknives.com/avail/12.jpg
http://www.ansoknives.com/avail/13.jpg
This is my version of a fixed blade Chineese folder...i just call it Chineese. The blade is 3.5" RWL-34 powdersteel at 60Rc and cryotreated. Overall lenght is 7.4". The knife comes with a kydexsheath set up so it can ride horizontal, vertical and at 45 degrees. The handlematerial is blue denim Fibermascus fitted with mosaic pins. The tang is tapered and the handle is very slim. Feels very good in the hand. Price 305 Euros
http://www.ansoknives.com/chineseonsheath.jpg
http://www.ansoknives.com/chinesemosaic.jpg
http://www.ansoknives.com/chinesetang.jpg
Payment accepted via personal or cassiers check, Western Union transfer and Paypal (for 3% extra to cover the fee.) Shipping is 15 Euros for one knife and 20 Euros for 2 or more. Take a look at my site for more pictures.
Thanks for looking.