Frequently Asked Questions:
Q: How old must I be to buy a knife?
A: It is an offence for anyone to sell a knife to any person under 18 years of age in the UK.
Section 6 of The Offensive Weapons Act 1996, which is an amendment to section 141 of The Criminal Justice Act 1988 (offensive weapons) states that:...
141A. - (1) Any person who sells to a person under the age of sixteen years an article to which this section applies shall be guilty of an offence and liable on summary conviction to imprisonment for a term not exceeding six months, or a fine not exceeding level 5 on the standard scale, or both.
(2) Subject to subsection (3) below, this section applies to-
(a) any knife, knife blade or razor blade,
(b) any axe, and
(c) any other article which has a blade or which is sharply pointed and which is made or adapted for use for causing injury to the person.
- '); loadVbCss(yuipath + '/treeview/assets/skins/sam/treeview.css'); //-->
Recent Forum Activityavoidspam
Thought I'd give this a go. Sorry if it's been tried before but I quite like the version on the other side of the pond. Everyone gets a bit creative with their camera's... Plus it's a nice opportunity to see what's out there....:) SamLast Post By: ted2 Yesterday, 08:46 PMCeltic Dragon
As mine is still in the smiths (and has been for 6 weeks and no end in sight) The parts I have here are being fantasy pimped :D For those results you'll have to wait a few days. In the mean time to aliviate my suffering, lets see yours :D be it pcp, springer, rimmie or centrefire.Last Post By: John56 Today, 01:40 AMSimon G
So, in the "let's see your rifles" thread, Rapidboy suggested a pistol thread. And as we always listen to the mods on here, let's give RB what he wants! (As opposed to what he needs!:D ) For UK mainland residents, obviously muzzle loaders and air. But for our friends in the not so discriminated...Last Post By: johnbaz Today, 12:42 AMPSY
As seen here: http://www.devil-forge.com/forges/DFPROF2%20-%20two%20burners.htm Has anyone had any experience with the company or their products? Does it seem like decent equipment for a hobbyist? Edited to add: I bought me one of their horseshoe maker models in the end and to answer my...Last Post By: ggfh666 Yesterday, 03:39 PMBGC_Tom
Hi all, So I recently bought a Bradford Guardian 3, along with a pair of ‘3D’ micarta scales to replace the G10 ones. The problem is, when I came to take the old scales off I just could not budge the screws! I’ve already broken one driver bit (one of those two-prong ‘spanner’ bits) and still...Last Post By: PuukkoJim Yesterday, 09:43 PMpolecat
Been Forging out a 10 inch Bowie style blade and got around to starting the polishing today, needs alot more work yet but its starting to look the part now. Think I finally understand how to set up the Hamons on this steel, but getting the best from the polishing is hard work. Not easy to...Last Post By: polecat Today, 12:35 AM