• Welcome to the all new BritishBlades website...

    Welcome to BritishBlades.com
    Your forum for knives, knifemaking, tools and outdoor equipment.
    • Are you looking for knives and knife reviews?
    • Do you need help with a knifemaking project?
    • Are you a professional knifemaker?
    • Are you a collector of custom and high-end production knives?
    ...then you have come to the right place!

    We will try to answer your questions and help you with your knifemaking adventures.

    Comments 28 Comments
    1. Phil's Avatar
      Phil -
      Very swish Martin. Good work there, the wife is in IT so I know how much effort this has taken to do. Thankyou! We'll all be used to it in no time, change is no fun at my age but... Luckily (?) I'm off work with flu so can get used to it and enjoy!
    1. TallNHairyDave's Avatar
      TallNHairyDave -
      Looks great Martyn! Thanks for all the work you and the admin team have put into the upgrade.
    1. deovolens's Avatar
      deovolens -
      Very nice and clean design, congratulations for the staff
    1. MagiKelly's Avatar
      MagiKelly -
      Have fun. I only had two 12 hour days at it before I got almost to where I wanted SotP I am sure you will have less hassle though since you actually know what you are doing.
    1. screaming skull's Avatar
      screaming skull -
      Very slick boss
    1. stretch3144's Avatar
      stretch3144 -
      Until I did a google search for BB I thought the site had crashed or something as my links to it won't work! However, now I've found it, the new look looks very interesting. Good luck to all involved with the transition - I hope its not too stressful.
    1. tree frog's Avatar
      tree frog -
      Very nice! Its clear, it's bright and it's easier to read. I think you and the team should be very happy with the upgrade, i am and i'm sure others are also.
    1. rlocock's Avatar
      rlocock -
      Looking good.
    1. Lumalee's Avatar
      Lumalee -
      Cheers Martyn, its a fresh new look for the new year, wont take long for peeps to get used to it. Keep up the effort, its a great site Lee
    1. theskenic's Avatar
      theskenic -
      Congratulatios Martyn. A nice, bright clean looking site. Good job. Congratulatios also to all the members that post here. The pictures, tutorials and comments are not to be missed. A great site has been made even better. Brian.
    1. Potatohead's Avatar
      Potatohead -
      Nice One Martyn,

      A lot easier on the Eyes. I do miss the old header a bit though. Was quite classy.

      Seems to be faster now too.

      Off to re-orientate myself
    1. jameswood's Avatar
      jameswood -
      very nice, we better start making some more tutorial to go on the front page, miss the old bb though
    1. Moodino's Avatar
      Moodino -
      Well. I'm shocked. No doubt the new back-end is smoother, more efficient and perhaps cheaper to run, but Geez! BB's former dark black UI was one of my favorites and as a Web pro, it's nice to land in a sexy UI. Please help me understand why I'm feeling this way, but I congratulate you if this is what you want and need.
      Thanks for the kind hosting BTW.
    1. razor600's Avatar
      razor600 -
      I like it.
    1. kenj's Avatar
      kenj -
      Very Nice Martyn much easier on the eye sight.
    1. Norfolkjohn's Avatar
      Norfolkjohn -
      As a new member,i find this site both informative & easy to use. And the advice given both helpful
      and appreciated.
    1. mantzao's Avatar
      mantzao -
      Hi guys,
      Im a new member and ive been reading some of your threads. I may say i find this site very usefull and very informative for anyone who likes knives. Still, I dont know how to post threads and things that i want for or that i want to trade/buy!
      Could use some help.

      Thanks
    1. snapgus's Avatar
      snapgus -
      Hello, I'm a new member and I'm very new to this business. I have some knives that I wish to sell and would appreciate any help/responses on how to post some adds...
      I hope everyone has a very happy new year
      Cheers
      Angus
    1. fluffy's Avatar
      fluffy -
      Quote Originally Posted by snapgus View Post
      Hello, I'm a new member and I'm very new to this business. I have some knives that I wish to sell and would appreciate any help/responses on how to post some adds...
      I hope everyone has a very happy new year
      Cheers
      Angus
      First become a contributing member.

      subscribe button is on the homepage
    1. monkey edge's Avatar
      monkey edge -
      Excellent. Very well done. Thoroughly thought out. A pleasure to navigate.
  • Subscribe

    Become a subscibing member by clicking the button below.

    Subscribe
  • Sponsored Links..

  • Sponsored Links...

  • Recent Forum Activity

    avoidspam

    What EDC are you carrying today?

    Thread Starter: avoidspam

    Thought I'd give this a go. Sorry if it's been tried before but I quite like the version on the other side of the pond. Everyone gets a bit creative with their camera's... Plus it's a nice opportunity to see what's out there....:) Sam

    Last Post By: 8steve88 Today, 09:17 AM Go to last post
    killrathi

    Blades...

    Thread Starter: killrathi

    Do your own knife with these blades... Ale blades i made from L2 steel, about 3mm thick and 60 HRC. Blades are ready to use - hardened, and sharp. You can finish them with satin or leave it and have fun from using :) NEW!!! - Traper total length: 23cm blade length: 11cm pin holes: 6mm...

    Last Post By: killrathi Yesterday, 10:40 PM Go to last post
    Noddy

    Para 3

    Thread Starter: Noddy

    A devotee of the Para 1, I hopped up and down like the Mad Monk about the Para 2, only to find myself pretty savagely disappointed by it when a first, then an improved second landed on the doormat. I often get wound up into an unreasonanble frenzy of enthusiasm about new Spydercos. I think they...

    Last Post By: ceri Today, 05:40 PM Go to last post
    C.T.A.K.C

    New UK legal folder from SOG

    Thread Starter: C.T.A.K.C

    What does everyone think about the SOG Terminus? Says its 3" blade with an unusual slip joint mechanism. Thoughts? http://www.sogknives.com/terminus-black.html

    Last Post By: Nice65 Today, 07:51 PM Go to last post
    jungle_re

    Not new but its been a while.............

    Thread Starter: jungle_re

    Thought i'd say "hi" to some old friends. The real world has been a bit busy the last few years but times are changing. Space for a decent workshop so time to dip the toe back in once set up.

    Last Post By: Dr Gonzo Today, 06:42 PM Go to last post
    R31n15

    Hand made knife

    Thread Starter: R31n15

    Hi guys. Im new to this site. It is nice to see so many knife lovers in one place. My pasion is pocket knifes and watches. I like to buy them and carry/wear them. So my long dream is to make my own knife. I know that there are many classes that offer just that but im not willing to pay 500 for...

    Last Post By: snappingturtle Today, 07:57 PM Go to last post
    WorldTraveler

    Hunter dream...

    Thread Starter: WorldTraveler

    Hello everyone. I was not on the forum for a while, and turn to introduce one of the knives that I finished. Steel - D2 Length - 25 cm Thickness - 4.3 mm Width - 3.00 cm Hande - Walnut, antler, vulcanizer fiber ... Leather sheath You can look me up on facebook and instagram, CB Knives. Thank...

    Last Post By: sorinknives Today, 05:47 PM Go to last post
    Andy

    Saw advice wanted

    Thread Starter: Andy

    I've moved and now have a wood burning stove to feed and have bits of wood the the last owners collected (and now some scrap from some work being done across the road) Is a silky still a good option for this? I figured I'm likely to end up cutting random bits of dried and green wood in the future....

    Last Post By: John56 Today, 08:29 PM Go to last post
    Dr Gonzo

    Titanium Spyderco Squeak with Elmax Blade

    Thread Starter: Dr Gonzo

    Titanium Spyderco Squeak with Elmax Blade 66% off on Massdrop...$94.99 instead of $279.95 plus $13.00 shipping :)

    Last Post By: Dr Gonzo Today, 05:49 PM Go to last post
    rabbit sniper

    Gamekeeper catapults

    Thread Starter: rabbit sniper

    Hi chaps does anyone have any experience with orders from gamekeeper John? I ordered a catapult off him in December it said could be 4/6 week waiting time but I've still not received anything from them. I emailed a few times and finally got a reply but all it said is yes we sent a confirmation...

    Last Post By: rabbit sniper Today, 10:38 AM Go to last post
  • Alexa

    Review britishblades.com on alexa.com