Tutorial: Wood sheath with leather braidsTutorial of wood sheat with leather braids.
Photos of the ready sheaths:
I have added some English text to photos.
I'm sorry, I haven't any tutorials with English text, only with Finnish text.
But however photos show the ways to make that sheats in that tutorial.
Here is the link to Finnish tutorial.
Wooden sheat with leather
I hope that those pages will open all around the world.
Perhaps some later I can add English text too ?
Here below I joint someone photos of that wooden-sheat making:
In my Damask gallery are some that kind sheats with knives too.
Here you can open it by this link:
- '); loadVbCss(yuipath + '/treeview/assets/skins/sam/treeview.css'); //-->
Recent Forum Activityavoidspam
Thought I'd give this a go. Sorry if it's been tried before but I quite like the version on the other side of the pond. Everyone gets a bit creative with their camera's... Plus it's a nice opportunity to see what's out there....:) SamLast Post By: Uriel Today, 10:25 PMKitman22
Hi guys, Well I was taking some pics of some of my gear when I came across the idea for what could be a great thread full with lots of eye candy for us all to see :D How about a thread full of pic of three of our most fav things here on BB? so... what is your wrist watch, torch & knife EDC...Last Post By: Uriel Today, 04:39 PMRoman Blaha
Hello, my name is Roman Blaha. I'm from the Czech Republic. From the town of Znojmo in the heart of beautiful South Moravia. Please excuse my English is not very good. I make knives for two years. From my own damask steel. I would like to share with you the joy of them. Here are some...Last Post By: Roman Blaha Today, 08:23 PMSmiling-Knife
The basic army-issue clasp knife with marline spike and tin opener in the first part of the 1900s was the pattern 6353/1905. It first appeared in 1905 and remained basically the same until the start of WWII. The original spec comprised of stag scales. The first knife in pic 1 is an example made by...Last Post By: Dutchy357 Today, 08:21 AMgruffalogriff
Modified this Openial No8 for my daughter. She found an antler last year while we were walking a Munroe in the Scottish highlands so i used a bit of that for the handle. Turned down the collar end on the lathe to fit the Openial hardware slotted the handle by clamping it in the woodworking vice and...Last Post By: gruffalogriff Today, 09:26 PMLupine
Hi, I have a Busse Bushwacker Mistress, which came with the rather horrible coating they apply. Using stones and a small hand sander, Ive gotten the bulk off, but I dont have the tools, and its uneven, and I need a knifemaker with a belt grinder/polisher to finish it off for me. This is the...Last Post By: FGYT Today, 10:20 PM