• Subscribe

    Become a subscibing member by clicking the button below.

    Subscribe
  • Sponsored Links..

  • Sponsored Links...

  • Recent Forum Activity

    avoidspam

    What EDC are you carrying today?

    Thread Starter: avoidspam

    Thought I'd give this a go. Sorry if it's been tried before but I quite like the version on the other side of the pond. Everyone gets a bit creative with their camera's... Plus it's a nice opportunity to see what's out there....:) Sam

    Last Post By: BKelly Today, 04:37 PM Go to last post
    Donbot

    What Did You Order Today?

    Thread Starter: Donbot

    I'll start off. Well HH got the SR1 back in so i just ordered my first Lion Steel and in sexy orange too! Woohoo, always loved the look of this one. This has to be my last knife for 6 months. Its getting ridiculous now! I justified this one by telling myself it's a Christmas present to...

    Last Post By: Istapp19 Yesterday, 09:36 PM Go to last post
    EdgePal

    Amazing Viking knives!!!

    Thread Starter: EdgePal

    This is something extra Ė at least for me. I found a man here in Sweden, he is 26 years old and he have make knifes for about 1,5 years now. His name is Edvin. Edvin is an archeologist and he make replicas of old Viking and dark ages knifes, you se some pictures of his knifes below. It is...

    Last Post By: GHEzell Today, 03:53 AM Go to last post
    watervole1

    Cold steel Trail Tomahawk mods

    Thread Starter: watervole1

    I have fancied getting a tomahawk for a while, but can't afford the handmade ones, unfortunately. I have read a few good things recently about the relatively inexpensive (over here in the UK) Cold Steel Trail Tomahawk and so I decided to buy one, and see what I can do to improve it. So, I don't...

    Last Post By: tomancik Yesterday, 04:55 PM Go to last post
    RaptureRaptor

    File/Rasp KITH

    Thread Starter: RaptureRaptor

    Howdy all I've always been enamoured with the idea of being part of a KITH but it doesn't seem that there are any at the mo'. So with that in mind I have decided to put forward a simple KITH idea to see if anyone's as keen as I am for a KITH. The rules as I figure them should be fairly...

    Last Post By: Steve George Today, 02:00 PM Go to last post
    suingab

    Custom Made Knife Scales. Pictures Here!

    Thread Starter: suingab

    Hi ALL! I`m making custom scales for stock knives (from G10, Micarta, Wood, Carbon Fiber, C-Tek, Kirinite) Now I`m able to make scales for these knives Spyderco: Military, Paramilitary2, Endura4, Delica4, Stretch, Persistence, Tenacious, Resilience, UKPK older, UKPK newest (coming soon),...

    Last Post By: ANDYLASER Yesterday, 05:31 PM Go to last post
    africanex

    Teach me about non-lethal projectiles?

    Thread Starter: africanex

    In all seriousness. I have a plague of vervet monkeys that are getting beyond cheeky. pulling thatch off guest tents, stealing pepper grinders, attempting to eat them (and then dropping them in the river when they cannot) and pretty much anything else not nailed down. My list is endless. ...

    Last Post By: *Dusty* Today, 01:32 PM Go to last post
    Claire Grills

    First blobby comp

    Thread Starter: Claire Grills

    Time's gone by and I notice that I have passed my first 500 post mark... As appears to be the custom, here is a comp to celebrate a new milestone of mindless drivel. Win a brandy new Mora 510 First Production Run fixed blade for your outdoor enjoyment (or indoor sandwich preparation as the case...

    Last Post By: Paul W Yesterday, 09:34 PM Go to last post
    coryjones

    Wicked edge pro pack 1

    Thread Starter: coryjones

    i recently bought a wicked edge and im getting a lot better at it now, ive taken a few pictures of the results i have achieved for myself and others, so i thought i should show all you guys what the wicked edge can do! all have been brought to a hair whittling mirror polish

    Last Post By: Uriel Today, 12:26 PM Go to last post
    n0rth3rnlight

    Letīs make the best EERF grinder there is!

    Thread Starter: n0rth3rnlight

    Hi guys. I am currently converting the cadfiles to the EERF-grinder to be cut from readily available 10mm steel (and 2 parts in 15mm steel to make drilling holes a little easier) and in the process i added the second toolslot as per design of polarbearforge. BUT i think we can do this grinder even...

    Last Post By: rojaz Today, 04:39 PM Go to last post
  • Alexa

    Review britishblades.com on alexa.com