The knives: A Chris Reeve Pacific, Strider MT Mod10 and a Fallkniven A1.
I thought it might be interesting to do a round-up of these 3 classic knives. I haven't got the time with them to do a field review yet. I've had the A1 for ages and pounded pretty hard on it, but the strider hasn't been with me long and the Chris Reeve Pacific hasn't left the house yet. But that shouldn't detract from the benefits of a closer look at them on the table.
All 3 of these knives represent some of the best in the industry, classic military designs from some of the best cutlers in the business. They may seem very different, but they merit comparison because they are all designed to serve in a similar role and succeed and fail in that role to various degrees. Right, lets take a closer look - get comfy, this is going to be a long one folks.
The Strider MT Mod 10:
Overall length of the knife: 255mm
Overall blade Length: 135mm
Cutting edge length: 110mm
Blade Thickness: 6.35mm
Blade coating: Sandblasted, tiger stripe.
Tang: Full tang.
Handle Material: Paracord wrap with paracord underwrap.
Steel: Crucible S30V
Weight of knife only: 272g
Weight of knife ...by
This review torch was very generously donated for a charity raffle at the LSECCA pub meet by Antony at www.flashaholics.co.uk ...
- '); loadVbCss(yuipath + '/treeview/assets/skins/sam/treeview.css'); //-->
Recent Forum Activityavoidspam
Thought I'd give this a go. Sorry if it's been tried before but I quite like the version on the other side of the pond. Everyone gets a bit creative with their camera's... Plus it's a nice opportunity to see what's out there....:) SamLast Post By: ted2 Yesterday, 08:46 PMCeltic Dragon
As mine is still in the smiths (and has been for 6 weeks and no end in sight) The parts I have here are being fantasy pimped :D For those results you'll have to wait a few days. In the mean time to aliviate my suffering, lets see yours :D be it pcp, springer, rimmie or centrefire.Last Post By: John56 Today, 01:40 AMSimon G
So, in the "let's see your rifles" thread, Rapidboy suggested a pistol thread. And as we always listen to the mods on here, let's give RB what he wants! (As opposed to what he needs!:D ) For UK mainland residents, obviously muzzle loaders and air. But for our friends in the not so discriminated...Last Post By: johnbaz Today, 12:42 AMPSY
As seen here: http://www.devil-forge.com/forges/DFPROF2%20-%20two%20burners.htm Has anyone had any experience with the company or their products? Does it seem like decent equipment for a hobbyist? Edited to add: I bought me one of their horseshoe maker models in the end and to answer my...Last Post By: ggfh666 Yesterday, 03:39 PMBGC_Tom
Hi all, So I recently bought a Bradford Guardian 3, along with a pair of Ď3Dí micarta scales to replace the G10 ones. The problem is, when I came to take the old scales off I just could not budge the screws! Iíve already broken one driver bit (one of those two-prong Ďspannerí bits) and still...Last Post By: PuukkoJim Yesterday, 09:43 PMpolecat
Been Forging out a 10 inch Bowie style blade and got around to starting the polishing today, needs alot more work yet but its starting to look the part now. Think I finally understand how to set up the Hamons on this steel, but getting the best from the polishing is hard work. Not easy to...Last Post By: polecat Today, 12:35 AM