The knives: A Chris Reeve Pacific, Strider MT Mod10 and a Fallkniven A1.
I thought it might be interesting to do a round-up of these 3 classic knives. I haven't got the time with them to do a field review yet. I've had the A1 for ages and pounded pretty hard on it, but the strider hasn't been with me long and the Chris Reeve Pacific hasn't left the house yet. But that shouldn't detract from the benefits of a closer look at them on the table.
All 3 of these knives represent some of the best in the industry, classic military designs from some of the best cutlers in the business. They may seem very different, but they merit comparison because they are all designed to serve in a similar role and succeed and fail in that role to various degrees. Right, lets take a closer look - get comfy, this is going to be a long one folks.
The Strider MT Mod 10:
Overall length of the knife: 255mm
Overall blade Length: 135mm
Cutting edge length: 110mm
Blade Thickness: 6.35mm
Blade coating: Sandblasted, tiger stripe.
Tang: Full tang.
Handle Material: Paracord wrap with paracord underwrap.
Steel: Crucible S30V
Weight of knife only: 272g
Weight of knife ...by
This review torch was very generously donated for a charity raffle at the LSECCA pub meet by Antony at www.flashaholics.co.uk ...
- '); loadVbCss(yuipath + '/treeview/assets/skins/sam/treeview.css'); //-->
Recent Forum Activityavoidspam
Thought I'd give this a go. Sorry if it's been tried before but I quite like the version on the other side of the pond. Everyone gets a bit creative with their camera's... Plus it's a nice opportunity to see what's out there....:) SamLast Post By: GeoffWood Today, 06:33 PMsuingab
Hi ALL! I`m making custom scales for stock knives (from G10, Micarta, Wood, Carbon Fiber, C-Tek, Kirinite) My page with some of my art works >> http://g10.lt If you want to order or have any questions - the best ways to contact me are Email (suingab (AT) gmail.com) or Skype (suingab)Last Post By: Nice65 Today, 12:47 AMkillrathi
Do your own knife with these blades... Ale blades i made from L2 steel, about 3mm thick and 60 HRC. Blades are ready to use - hardened, and sharp. You can finish them with satin or leave it and have fun from using :) NEW!!! - Pioneer total length: 26cm blade length: 13cm blade height: 4cm...Last Post By: luresalive Today, 04:11 PMroscotanna
These have to be the bargain of the century. I've had a few and replaced the one that was stolen because I liked it so much and also got my dad one last year. Recently been reduced to £2.99 which really can't be sniffed at! Free delivery too. UK notes dont fit in the slot the way US dollars do...Last Post By: scrumpypaul Today, 05:52 PMWarHead3000
Hi Guys I just wanted to pose a personal question to all custom makers on the accepted protocols or order of business for a knife commission. I ask this as a few experiences I have had with custom knife makers have left me perplexed in how the agreement of a commission works, especially when...Last Post By: Steep Today, 09:28 AMminds_eye
In the history of my mundane questions on BB, I think this one takes the biscuit. I'm after some decent ziplock type bags for carrying snacks etc whilst hiking. I used to have some freezer type ones we used for soup etc that were wider at the base, would stand up for filling, and had two...Last Post By: Nice65 Yesterday, 11:52 PMMLL Knives
OVERALL LENGTH OPEN: 218mm 8.58". OVERALL LENGTH CLOSED: 128mm 5.04". BLADE LENGTH (from handle to tip): (90mm) 3.54". THICKNESS: (4mm) 0.157". Hand made from scratch, hope you guys like it. Have a nice dayLast Post By: MLL Knives Today, 04:56 PMalongoria
Hello, my name is Adam. I'm a new member of British Blades Forums. I am a knife collector, but mostly user. I like puukkos. I've had Roselli knives and have a Malanika puukko coming to me soon. I have a question I hope your experience can provide me information. I would like a Sami type...Last Post By: Igorrock Today, 10:39 AM