**Pictures** Klarus XT30 (XM-L U2) 820 lumens thrower flashlight

[Data_HU]

Hello guys

Here is the newest Klarus light. First impressions:

+ excellent build quality (very similar than Jetbeam RRT series and Sunwayman lights)
+ excellent anodizing and color
+ smooth threads
+ high quality, clean, dust free reflector and lens
+ comfortable UI
+ nice, strong holster

- a little bit noisy driver
- slightly pwm flickering low and medium modes, but I can't see when I use in outdoor

Official site, user manual and box say: 10lm (180h), 310lm (5.5h), 820lm (1.8h) and 29000cd (max. 360m)
This light has more than 29000cd. It's sure.

I think, this is the correct specs,

Features:

Specially designed deep parabolic reflector produces a perfect beam profile and super long throw ability. Intended applications include Military, Law Enforcement, Hunting, Exploration, Security, Search & Rescue, etc
Uses a Cree XM-L U2 LED, which delivers a maximum output of 820 ANSI lumens
Max run time: 208 hours
Beam throw ability: 400 meters
New circuit design delivers both high lumen output and long runtime
Dual button tail switch for quick, one-hand operation. No need to fiddle with switches in two different places
Strobe can be activated with the Mode switch when the flashlight is on or off, giving instant access to Strobe from any mode
Detachable stainless steel strike bezel
Reverse polarity protection protects flashlight and battery from damage
Maintains constant brightness with super high efficiency


Specification:

CREE XM-L (U2) LED with a lifespan of up to 50,000 hours
Three lighting modes and 1 flashing mode:
Lighting modes: 820 ANSI lumens (2 hrs) --- 150 lumens (13.4 hrs) --- 10 lumens (208 hrs)
Variable frequency strobe: 820 lumens (4 hrs)

Working Voltage: 7V - 14V
Battery: 4x CR123A / 2x 18650 (use of 16340 batteries is not recommended)
Body color: Military grey
Reflector: Deep smooth reflector
Tactical main switch for turning the light on and off. Momentary activation from off
Dedicated mode switch for instant access to strobe and changing modes
Lens: Toughened ultra-clear glass
Material: Aircraft grade aluminum 6061-T6
Dimensions: 248.1mm (Length) x 58mm (Head) x 25.4mm (Body)
Net weight: 273g (Excluding battery)
Waterproof to IPX-8 Standard (underwater to 2 meters)
Included accessories: Holster, lanyard, metal tactical ring and two spare o-rings

Note: The above-mentioned parameters are approximate and may vary between flashlights,
batteries and environments. Data was achieved using SANYO 18650 2600 mAh lithium ion
batteries.

Operation:

To activate constant-on, press tail/ higher switch fully so that it clicks. To turn the flashlight off, press tail switch fully so that it clicks.
Changing brightness levels: When the flashlight is on, press the Mode switch and then release it immediately; the brightness mode will change: High – Medium - Low.
Strobe access: With the flashlight turned off, press the Mode switch for instant access to strobe. With the flashlight turned on, press the Mode switch for more than 0.6 of a second to access strobe. Release Mode switch within 2 seconds to return to your previous lighting mode. Holding the Mode switch for more than 2 seconds will lock the light in strobe mode. Pressing the Mode switch will stop the strobe mode and return the light to its previous lighting mode.
Momentary activation: lightly press the main tail switch with no click.

and now, here is the pics

[Data_HU]

beamshots

XT30 vs Sunwayman T20CS






XT30 vs Fenix TK35 U2 (29000cd)






XT30 vs Olight SR51