Woodlore(ish) blade

[Trond]

There seems to be quite an interest on thes blades, therefore i have made an arrangement with Danzo on shipment on the blades to save money.
This is how we are going to do this:
This offer wil be avaliable for 7 days from now, after that i wil send an e-mail to each that has ordrered with an aproxemately time of shipment.
When i have finnished the blades that has beene ordered, i wil send them to Danzo i one package, and he wil distribute them in England.
The price wil be EUR 61,- Not included the shipment as this depends on how many people that orders one.
Ordering has to take place on e-mail or PM
Payment takes plase with Visa Creditcard only. When you have ordered you wil recive information on how to go from there.

Description on the blade:
lenght ca. 22 cm
blade ca 10,5 cm
whith ca 28 mm on the blade
thickness ca 3,5 mm
Steel type: 20 steel (1% carbon ca 56-58 Rockwell C.)
[IMG]

[keith_beef]

I must have been asleep...

Are you making these, Trond?

What is "20 steel"?

Where's the choil gone?


Keith.

[Trond]

I must have been asleep...

Are you making these, Trond?

What is "20 steel"?

Where's the choil gone?


Keith.

Yes

It is simmular to 01 Just a litle more carbon

What is the choil?

[Colin KC]

BTW Trond, I'll have one

[Tony]

This may sound a bit dumb but......:confused: is it just the steel? We fit our own handles etc? Seems that it must be, but hey what do I know

[Trond]

This may sound a bit dumb but......:confused: is it just the steel? We fit our own handles etc? Seems that it must be, but hey what do I know

Hey Tony,
There is no such thing as a dumb question
Yes it is "just" the blade, So go ahead make your handle Tone

Collin, you are on my list, thanks

[Colin KC]

Trond, can I have mine, annealed please?
& what size are the pin holes? 6mm?


Ta

[Trond]

Trond, can I have mine, annealed please?
& what size are the pin holes? 6mm?


Ta

What is annealed?
yes the holes are 6mm

[Colin KC]

What is annealed?
yes the holes are 6mm

Not hardened/tempered, soft, as it comes from suppliers

[Trond]

Not hardened/tempered, soft, as it comes from suppliers

Yes you can, but why? am I allowed to ask that?

[Colin KC]

So that I can do the HT myself, no offence intended of course Trond

[Trond]

Go ahead, knock yourself out
None taken, as i recon you havent tested any of my blades, and therefore can not know how the heat treat is on them.
Do you want me to save some of the edge so that you can fine grind the edge after heat treat? I usually grind them before heat treating, but saves 1 mm on the edge, so that i can do that after heat treating them.

[Colin KC]

Yah, that's just about perfect Trond, thanks

[boaty]

PM sent - it's too swoopy to resist !

Trond, I assume you're going to put your name on the blade like you do with the ones on your website? It'll be nice to have the maker's name on this soon-to-be classic

Now I just need a little help making the handle and sheath...

[Trond]

youre on my list to Rob :-)
If there is anything i can help you with on the rest, do not hazitate to ask