1/4" Lanyard tube supplier.

[twelveboar]

Sorry for posting something that has probably been asked a couple of hundred times before, but I did a quick search and couldn't find one listed.
I'm after about an inch and a half of 1/4" lanyard tubing in either a white metal or brass, could anyone direct me towards a supplier or sell me a bit from their own stock?
Also, is there any tips for drilling scales I should follow?
Cheers.

[easilyled]

PM me your address and I'll stick a bit in the post.

[Inspector71]

My favourite place at the moment for 'misc metal bits' is here...

http://www.mallardmetals.co.uk/

Great range of reasonably priced stuff for modelmakers etc. Everything for the knifemaker as well - in small amounts if you need it. Good service as well. No affiliation etc..

Cheers,
Rod

[Lord Farquhar]

Would not 6mm suffice, you can get 6mm brass and alu tube from B&Q.

[twelveboar]

Thanks for the help guys, I've managed to scrounge some brass and stainless due to the kindness and generosity of BB's membership, so I'll just have to make more knives now.